NB16WV ADSL2+ WiFi Modem Router with Gigabit WAN, VoIP & USB Host
Awesome Support
There are many modems which will work with our adsl services. As you can appreciate we can only support the hardware that we sell. However we have ammassed a wealth of information and screen shots which will assist you with your modem, even if you have an unsupport device.
Specifications
Package Includes
- ADSL2+ WiFi Modem Router with Gigabit WAN, VoIP & USB Host
- Power Adapter
- Printed Quick Start Guide
- Ethernet Cable (RJ-45)
- Phone Cable (RJ-11)
- Wireless Security Card
- Warranty Card
Environmental and Physical
- Operating temperature: 0-40°C, Humidity: 10%-90% non-condensing
- Storage temperature: -10-70°C, Humidity: 0%-95% non-condensing
- Dimensions: 215mm (L) x 37mm(W) x 145mm(H)
- DC Input Voltage 12V/1.5A
Device Interface
- 1 x USB 2.0 for 3G/4G modems
- 1 x USB 2.0 for file sharing
- 1 x 10/100/1000Mbps RJ-45 WAN port
- 4 x 10/100Mbps RJ-45 LAN ports
- 1 x RJ-11 FXS port for VoIP
- 1 x RJ-11 ADSL port
- WPS/Reset Button
- Power button
- Power jack
- Power / ADSL sync / 3G signal / Internet / LAN 1-4 / WAN / WiFi / FXS
ADSL2+
- ITU 992.1 (G.dmt) Annex A
- ITU 992.2 (G.lite)
- ITU 992.3 ADSL2 (G.dmt.bis)
- ITU 992.5 ADSL2+
- PPPoE / PPPoA / IPoA / Static IP / Dynamic IP
Wireless WAN
- 1 x USB 2.0 port for external HSPA modem
- PPP (for WCDMA / HSPA)
Ethernet WAN
- 1 x Gigabit WAN port (10/100/1000 Mbps)
- PPPoE, DHCP client, Static IP, PPTP, L2TP
Functionality
| IPv6 Support |
|
VoIP
| Protocol |
|
| Voice Compression |
|
| Call Function |
|
Security
- IP/Service Filter
- URL blocking
- MAC control
- DoS (Denial of Service) Protected
Routing
- Static Route
- Dynamic Route (RIP v1/v2)
- DMZ
- DDNS
Administration
- SNMP
- UPnP
- IGD
- Syslog
- Web-based UI
- Remote Login
- TR-069 Auto provisioning
- Backup/Restore Settings
Compliance
- A-Tick
Dimensions
- 215mm (L) x 37mm (W) x 145mm (H)
- Weight: 401g
Firmware
Updating your Firmware is only recommended if you are having problems with your product or have been asked to do so by a NetComm Reprentative. It is critical to select the correct firmware for your product, before proceeding please confirm you are on the correct page by checking the sticker on the base of your NetComm equipment for the part/product number. You should also read the firmware upgrade instructions - located below - before starting the download.
Please take caution while upgrading the firmware. Installation of the incorrect firmware file, disruption to the power source or a break in the connection to your computer during the upgrade process may render your device unusable and void the product warranty.
Step 1 - Download the Firmware and Upgrade Instructions
- NB16WV Firmware R0.09
NB16WV_R0.09.zip (7.7 MB)
Step 2 - Before Installing firmware
Do NOT use a Wireless connection to upgrade the firmware.
Step 3 - Prepare the files
If the file's extension is ".dat", ".cdi", ".img" or ".bin", do not try to open the files on your computer as they can become corrupt. You need to follow the instructions from the Firmware Upgrade Instructions Guide.
If the file's extension is ".zip" then you need to unzip the compressed files to a location on your computer to get the actual firmware file using UnZip or WinZip software and then follow the instructions from the guide.
GNU General Public License
This product may include software code that is subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). This code is subject to the copyrights of one or more authors and is distributed without any warranty. A copy of this software can be obtained by contacting NetComm Limited on +61 2 9424 2059. A postage and handling fee of AUD$10.00 will be applicable.
Emulator
What is an Emulator?
An emulator replicates the functions of a NetComm device which is viewable from a standard web browser. Emulators are frequently used by support staff to view exactly what the customer is seeing when they login to the User Interface of their NetComm product.